//------------------------------------------------- // Shenzhen TOPWAY Technology Co.,Ltd. // LCD Module: LMT043DFFFWD-NEA // System: W78E516D(12MHz, 6T) // Display Size: 480(RGB)x272 // Driver/Controller: S1D13L01 // Interface: I/O SPI mode // Date: 2018-07-18 // by lu jianhui // note: PLL mode 10M CLKI 54M MCLK 9M PCLK //------------------------------------------------- #include #include #include #include #include #define uchar unsigned char // 8bit, 0 ~ 255 #define uint unsigned int // 16bit, 0 ~ 65,535 #define ulong unsigned long // 32bit, 0 ~ 4,294,967,295 //----------------------------------- // define I/O //----------------------------------- #define LCDBUS_H P1 sbit A0 = P2^0; sbit _RST = P2^2; sbit TE = P2^3; sbit _RD = P2^4; sbit _LB = P2^6; sbit _UB = P2^7; sbit BL_ADJ = P3^7; sbit SPI_EN = P3^6; sbit _CS = P2^1; sbit SCLK = P2^5; sbit SI = P0^0; sbit SO = P0^1; sbit D2 = P0^2; sbit D3 = P0^3; sbit D4 = P0^4; sbit D5 = P0^5; sbit D6 = P0^6; sbit D7 = P0^7; sbit _TP_CS = P3^1; // TP.CS sbit TP_DCLK = P3^0; sbit TP_DIN = P3^2; sbit TP_DOUT = P3^4; sbit _TP_PENQ = P3^5; // 0 = touched //---------------------------------- // 触摸屏驱动子程序 sbit TPENIRQ = P3^5; sbit TDOUT = P3^4; sbit TBUSY = P3^3; sbit TDIN = P3^2; sbit T_CS = P3^1; sbit TDCLK = P3^0; uchar bdata transdata; //该变量可为位操作之变量 sbit transbit7 = transdata^7; sbit transbit0 = transdata^0; //----------------------------------- bit AutoRun; // 1 for auto run, 0 for manual run uchar bdata btemp; // create a bit accessable byte sbit btemp_b0 = btemp^0; sbit btemp_b1 = btemp^1; sbit btemp_b2 = btemp^2; sbit btemp_b3 = btemp^3; sbit btemp_b4 = btemp^4; sbit btemp_b5 = btemp^5; sbit btemp_b6 = btemp^6; sbit btemp_b7 = btemp^7; // uint TP_x; // TP data after touch uint TP_y; uchar TpCheck; uchar code TDisplay[]={0xC3,0x66,0x3C,0x18,0x18,0x3C,0x66,0xC3,}; //uint txdata,tydata; //----------------------------------- // define 16bit colors //----------------------------------- #define RED 0xf800 #define GREEN 0x07e0 #define BLUE 0x001f #define YELLOW 0xffe0 #define CYAN 0x07ff #define MAGENTA 0xf81f #define BLACK 0x0000 #define WHITE 0xffff #define GRAY04 0x4208 //----------------------------------------------------------------------------- // delayms routine // Parameter:m = time in ms //----------------------------------------------------------------------------- void delayms(uint m) // 12MHz Crystal, close to ms value { uint j; uint i; for(i=0; i>16; command = 0x8800+addr19; _CS = 1; _CS = 0; SCLK = 0; SPI_WriteByte(0x88FF&command); //写命令 SPI_WriteByte(addr); //写地址 SCLK = 0; } //----------------------------------------------------------------------------- // Fill full screen routine // Parameter:fill color // 1. Write the start Address // 2. Write the Horizontal Data // 3. Change the next Horizontal Address // 4. Write next Horizontal Data //----------------------------------------------------------------------------- void FillFullScn(uint color) { ulong addr; uint i,j; addr=0; for(i=0;i<272;i++) { SdCmd(addr); // Write the start Address for(j=0;j<480;j++) { SdData(color); // Write the Horizontal Data SdCmd(addr=addr+2); // write next Address } //addr=addr+960; //Next Horizontal Address } } // //---------------------------------- // 触摸屏驱动程序 TOUCH PANEL PROGRAAM //---------------------------------- //----触摸屏驱动函数---------------- uint TdData(uchar Command) // Command为控制字 { uchar i; uint Tdata=0; TDCLK=0; // DCLK=0 delayms(10); // 延迟10ms,躲避触摸过程的抖动阶段(可调) transdata=Command; TDOUT=1; TBUSY=1; T_CS=0; // 选通触摸屏 for(i=0;i<8;i++) // DCLK第1-8脉冲写控制字 { TDIN=transbit7; // 1位控制字数据给DIN TDCLK=1; // DCLK=1 TDCLK=0; // DCLK=0 transdata=transdata<<1; } delayms(2); for(i=0;i<8;i++) // DCLK第9-16脉冲读AD数据D11-D4位 { transdata=transdata<<1; TDOUT=1; TDCLK=1; // DCLK=1 TDCLK=0; // DCLK=0 transbit0=TDOUT; // 延迟200ns以上读AD值transbit0 } Tdata=transdata; // 将D11-D4(8位数据)转移到中间变量 Tdata=Tdata<<4; transdata=0; //准备下一轮的读取数据 for(i=0;i<8;i++) // 第17-24脉冲读AD数据D3-D0位和4个空操作 { transdata=transdata<<1; TDOUT=1; TDCLK=1; // DCLK=1 TDCLK=0; // DCLK=0 transbit0=TDOUT; // 延迟200ns以上读AD值 } Tdata=Tdata|(transdata>>4); // 组合成12位AD数据 T_CS=1; // 封锁触摸屏 return(Tdata); // 返回给调用函数 } //-------读取触摸屏点数值------------ void RdTData () { uint txdata,tydata; double decimal_x,decimal_y; txdata=TdData(0xd0); // 读取AD数据x值 tydata=TdData(0x90); // 读取AD数据y值 decimal_x = ((double)(txdata-165 ) / (double)3755); decimal_y = ((double)(tydata-290 ) / (double)3534); TP_x = (decimal_x * 472) ; TP_y = (decimal_y * 264); } //----------------------------------------------------------------------------- // Fill mono Box routine // Parameter:Box Width, start position of X,start position of Y, // fill front color, fill Background color, Color Data // 1. Write the start Address // 2. Write the Horizontal Data of front color or Background Color // 3. Change the next Horizontal Address // 4. Write next Horizontal Data // PS:W=Width/8 //----------------------------------------------------------------------------- void monoFill(uint H,uint W,uint x, uint y, fg_color, bg_color, uchar *Data ) { uchar i,j,k,Ddat; ulong addr; addr=960;//640 addr=addr*y; addr=addr+x*2; for(i=0;i400 && TP_x<470) { if(TP_y>200 && TP_y<265) { AutoRun=0; WaitFlag=0; } } } } if (AutoRun==1) // Auto Run mode, do delay and quit { delayms(100); WaitFlag=0; } } } //----------------------------------------------------------------------------- // LCD initialization routine // 1. Set the Power mode to PSM0 // 2. PLL setting // 3. Panel setting // 4. main Panel RAM setting // 5. PIP RAM setting // 6. Set the Power mode to PSM1 //----------------------------------------------------------------------------- void initLCM(void) { // PLL setting SdCmd(0x60804); SdData(0x0000); // PSM0 Mode, Disable Memory and LCD Power / Clock delayms(100); SdCmd(0x60810); SdData(0x0000); // Select PLL, Disable PLL SdCmd(0x60812); SdData(0x0003); // N = 0, MM = 5 => CLKI = 10 MHz / 5 => 2MHz SdCmd(0x60814); SdData(0x0018); // L = 0x18 => POCLK = 2MHz * 27 = 54 MHz SdCmd(0x60810); SdData(0x0001); // Don't Enable PLL, Bypass delayms(100); SdCmd(0x60816); SdData(0x0006); // With PLL: PCLK := 54MHz / 6 = 9MHz SdCmd(0x60804); SdData(0x0001); // Enable Memory Power / Clock delayms(100); // Panel setting SdCmd(0x60820); SdData(0x008F); // DE is low, Data ready on PCLK rising edge, 24bit enabled SdCmd(0x60822); SdData(0x0001); // TE is off, Inverted Data SdCmd(0x60824); SdData(0x003C); // The display period of HS = 480/8 = 60 SdCmd(0x60826); SdData(0x002D); // The empty period of HS = 525-480=45 SdCmd(0x6082c); SdData(0x0002); // HS Polarity = 0, Pulse width = 2 SdCmd(0x6082e); SdData(0x0002); // The start position of HS = 2 SdCmd(0x60828); SdData(0x0110); // The display period of VS = 272 SdCmd(0x6082a); SdData(0x000D); // The empty period of VS = 285-272=13 //old TFT is set to 0x000E, new TFT is set to 0x000D SdCmd(0x60830); SdData(0x0002); // VS Polarity = 0, Pulse width = 2 SdCmd(0x60832); SdData(0x0002); // The start position of VS = 2 // Main Panel RAM setting SdCmd(0x60840); SdData(0x0001); // Main Panel&PIP enable, and Main Panel display data is RGB=5:6:5 SdCmd(0x60842); SdData(0x0000); // The start Address of Main Panel = 00000h SdCmd(0x60844); SdData(0x0000); // // PIP RAM setting SdCmd(0x60850); SdData(0x0001); // PIP display data is RGB=565 SdCmd(0x60852); SdData(0xFF70); // The start Address of PIP Panel = 3FF70h SdCmd(0x60854); SdData(0x0003); // SdCmd(0x60856); SdData(0x0064); // Display width of PIP = 100 SdCmd(0x60858); SdData(0x0039); // Display width of PIP = 57 SdCmd(0x6085a); SdData(0x0000); // The start position of X of PIP = 0 SdCmd(0x6085c); SdData(0x0000); // The start position of Y of PIP = 0 SdCmd(0x60860); SdData(0x0000); // No PIP SdCmd(0x60862); SdData(0x0000); // SdCmd(0x60864); SdData(0x0000); // Transparency disable SdCmd(0x60866); SdData(0x0000); // Transparency Key Color setting SdCmd(0x60868); SdData(0x0000); // Transparency Key Color setting //GPIO setting SdCmd(0x608D0); SdData(0x0007); // GPIO3 is input, GPIO[2:0] are output SdCmd(0x608D2); SdData(0x0007); // GPIO[2:0] output high,TFT display normal mode SdCmd(0x60804); SdData(0x0002); // PSM1 Mode, Enable Mem and Panel Clock delayms(100); } // //----------------------------------------------------------------------------- // Main program // 1. I/O initialization // 2. Reset MCU // 3. LCD initialization // 4. Loop Fill Picture //----------------------------------------------------------------------------- void main() { EA = 0; // no interrupt SCLK = 0; BL_ADJ = 0; // Close the Backlight of TFT _TP_CS = 1; // TP.CS TP_DCLK = 0; TP_DIN = 0; TP_DOUT = 1; _TP_PENQ = 1; // 0 = touched SPI_EN = 1; SPI_Init(); AutoRun = 0; _RST=1; delayms(100); // wait for all power stable _RST=0; delayms(100); // reset pulse _RST=1; delayms(500); // wait till internal reset routine finish SPI_EN = 1; // 使能SPI SO = 1; SI = 1; SCLK = 0; _CS = 0; initLCM(); // LCD initialization BL_ADJ = 1; // Open the Backlight of TFT delayms(100); while(1) { //_CS = 0; FillFullScn(RED); delayms(100); WaitKey(); delayms(500);//全红 FillFullScn(GREEN); delayms(100); WaitKey(); delayms(500);//全绿 FillFullScn(BLUE); delayms(100); WaitKey(); delayms(500);//全蓝 FillFullScn(WHITE);delayms(100); WaitKey(); delayms(500);//全白 FillFullScn(BLACK);delayms(100); WaitKey();delayms(500);//全黑 } } // //----------------------------------------------------------------------------- // End off //-----------------------------------------------------------------------------